Printer compatibility
PrintHaus PLA works with any FDM printer that takes 1.75mm filament, which covers almost every home and print-farm printer sold today. The only thing to check is your printer's filament diameter: a few machines use 2.85mm instead.
Printer compatibility at a glance
| Brand | Popular models | Works with PrintHaus PLA? |
|---|---|---|
| Bambu Lab | A1, A1 mini, P1S, P1P, X1 Carbon | Yes, 1.75mm |
| Prusa | Core One, MK4S, MK4, MK3S+, MINI+, XL | Yes, 1.75mm |
| Creality | Ender-3 series, K1 series, K2 Plus | Yes, 1.75mm |
| Anycubic | Kobra series | Yes, 1.75mm |
| Elegoo | Neptune series, Centauri Carbon | Yes, 1.75mm |
| Flashforge | Adventurer 5M, 5M Pro | Yes, 1.75mm |
| Sovol, Qidi, Voron and most kit printers | Most models | Yes, if set up for 1.75mm |
| Ultimaker | S-series, 2+, 3 | No, these use 2.85mm |
Not on the list? Check your printer's spec sheet or the filament setting in your slicer. If it says 1.75mm, you're good to go.
Setting it up
- Choose the Generic PLA profile in your slicer.
- Set the nozzle to 190–230°C and the bed to 50–65°C. 210°C and 60°C are a good start.
- Check the filament diameter is set to 1.75mm.
Full details, plus fixes for stringing and warping, are in our PLA print settings guide.
Multi-colour systems and spool holders
Each spool holds 1kg and fits standard spool holders. If you use a multi-colour unit such as a Bambu AMS or a Creality CFS, check the spool fits your unit before loading it, and re-spool onto a compatible spool if needed.
Questions
Not sure about your printer? Email contact@printhaus3d.store with the model and we'll tell you straight.